AutoFEM Finite Element Analysis Verification Tests
- Verification Tests based on Tetrahedral Finite Elements
- Static Analysis
- Bending a Cantilevered Beam under a Concentrated Load
- Bending a T-shaped Beam
- Deflection of a Beam under a Uniformly Distributed Load
- Static Analysis of a Round Plate Clamped along the Contour
- Square Plate Subjected to Force at Center
- Clamped Square Plate Under a Uniformly Distributed Load
- Cylindrical Reservoir with Walls of Constant Thickness
- Torsion of Shaft with Circular Cross-section
- Torsion of a Beam with the Square Cross-Section
- Bar Subjected to Self-Weight
- Analysis of Rotating Solid Disc of Constant Thickness
- Deflection of a Cantilevered Beam under a Weight at its End
- Beam on Elastic Foundation
- Large Deflection of a Circular Plate
- Deflection of the Beam under the Action of Three Forces
- Beam under the Action of Two Tensile Forces
- Torsion of a Shaft under the Action of Two Torques
- Stresses of an Orthotropic Plate at Biaxial Tension
- Thermoelasticity
- Contact problems
- Frequency Analysis
- Natural Frequencies of a Cantilever Beam
- First Natural Frequency of the Cantilever Beam under the Stretching Longitudinal Force
- Determining the First Natural Frequency of a Round Plate
- Natural Vibrations of Spherical Dome
- Bending Vibrations of a Circular Ring
- Axial and Transverse Vibration Frequency of a Beam with a Weight
- First Natural Frequency of a Spring-Mass System
- Buckling Analysis
- Forced Harmonic Oscillation
- Thermal Analysis
- Steady-State Temperature of a Multilayer Wall
- Flow of Heat in a Sphere
- Thermal Conductivity of a Cylindrical Wall
- Thermal Contact Between Plain Plates
- Thermal Contact Between Cylindrical Surfaces
- Thermal Contact Between Spherical Surfaces
- Disk with a Constant Temperature on the External Cylindrical Surface is being heated along the axis
- Distributed Heat Source applied to the Cylindrical Surface inside the Disk
- Point Power Source inside the Sphere
- Temperature Field of a Thermal System of a Heat Sink and a Chip
- Orthotropic Graphite Plate under Steady State Temperature Regime
- Temperature Field of a Two Cylinders with a Thermal Resistance Between
- Isotropic Plate under Heat Flux and Convection
- Thermal Heat Flux in an Isotropic Disk
- Radiation of a Plate into External Environment
- Hollow Sphere Radiating Outwards
- Non-Stationary Temperature Field in an Isotropic Sphere
- Non-Stationary Temperature Field in an Isotropic Sphere with the Heat Transfer on the Surface
- Non-Stationary Temperature Field in an Isotropic Sphere with Convection on the Surface
- Non-Stationary Temperature Field in an Isotropic Cylinder
- Non-Stationary Temperature Field in an Orthotropic Plate
- Dynamic Analysis
- Static Analysis
- Verification Tests based on Triangular Finite Elements
- Static Analysis
- Bending a Cantilevered Beam under a Concentrated Load (surface)
- Bending a T-shaped Beam (surface)
- Deflection of a Plate under the Gravitation
- Static Analysis of a Round Plate Clamped along the Contour (surface)
- Square Plate Subjected to Force at Center (surface)
- Clamped Square Plate under a Uniformly Distributed Load (surface)
- Cylindrical Reservoir with Walls of Constant Thickness (surface)
- Torsion of a Tube with Ring Cross-Section
- Static Analysis of Rotating Solid Disc of Constant Thickness (surface)
- Deflection of the Beam under the Action of Three Forces (surface)
- Strip under the Action of Two Tensile Forces
- Torsion of a Thin Tube under the Action of Two Torques
- Deflection of a Plate under Pressure
- Infinite Beam on Elastic Foundation
- Large Deflection of a Circular Plate (surface)
- Thermoelasticity
- Frequency Analysis
- Natural Frequencies of a Cantilever Beam (surface)
- First Natural Frequency of the Cantilever Beam under the Stretching Longitudinal Force_2
- Determining the First Natural Frequency of a Round Plate (surface)
- Natural Vibrations of Spherical Dome (surface)
- Bending Vibrations of a Circular Ring (surface)
- Axial and Transverse Vibration Frequency of a Beam with a Weight (surface)
- Buckling Analysis
- Forced Harmonic Oscillation
- Thermal Analysis
- Dynamic Analysis
- Static Analysis
- Copyright
2018 AutoFEM Software LLP. All rights reserved.